Mac OSX Drivers

*** Updated 1/29/15 with SiLabs signed driver for Yosemite.

For: RIGblaster Advantage
     Plus II
     Plug & Play
     RIGtalk

1. Download the OSX driver for your device here:
http://www.westmountainradio.com/zip/WMRRIGblasterRIGtalk-1.3.zip

2. Your browser should store the file in the Downloads directory within 
your user directory unless you specified another location. You'll need 
to double click the zip file to extract it (Note: Safari does this 
automatically).

3. Once extracted you should find a package file, 
SiLabsUSBDriverDisk.dmg. Double click this file to begin the 
installation.

4. Proceed through the driver installation wizard. No options need to be 
selected so just click Next until the installer is finished. You may be 
asked to reboot the computer after the install is finished.

5. Once the installer has finished (and after any reboot), plug in your 
device. The green PWR led should be on.

6. Open the Apple menu in the upper left of your screen and select the 
'About this Mac' option.

7. On the dialog that comes up, click the More Info button.

8. You should now be looking at the System Profiler. In the left column, 
click the USB entry. You should see a list of USB devices show up on the 
right side of the window. You should see your RIGblaster/RIGtalk device 
in that list. If you have an Advantage, you should also see a RIGblaster 
Audio Device.

9. For testing, we recommend using Fldigi. The Fldigi download for OSX 
can be found here: http://www.w1hkj.com/download.html

10. If using Safari, the downloaded .dmg file will automatically be 
mounted and you can goto Step 11. Other browsers will again place the 
file in the Downloads folder. You will need to double click the file to 
mount it.

11. Drag the Fldigi icon from the window that comes up to your 
Applications directory.

12. Run Fldigi from your Applications directory and refer to the latest 
manual for your device for instructions on setting up Fldigi to use your 
RIGblaster.

13. When setting up rig control, use the tty.SLAB_USBtoUART device. This 
is the virtual serial port which is used for rig control, ptt, and 
fsk/cw. When setting up the Audio, use PortAudio and select the 
RIGblaster Audio device for both Input and Output.